GLOSS SPRAY VARNISH FOR ACRYLIC RESINS

Make sure the surface to be treated is clean, dry and free from dust or any other traces of air pollution.

Use a cloth, newspaper or painter’s tape to protect surrounding surfaces from splashes.

Shake the spray bottle vigorously for 1-2 minutes to ensure that the varnish is thoroughly mixed.

Hold the sprayer at a distance of 20 cm from the surface and keep it at a constant distance for even coverage.

Apply pressure to the nozzle head by sweeping your hand from left to right, then a second pressure from right to left, and so on.

You need to hear a “pschitt” per change of direction, so successively hear “pschitt, pschitt, pschitt” rather than a continuous “pschiiiiiiiitt”, to avoid unsightly castings or overspray.

Spray the varnish in thin, even coats. Start with a light coat and leave to dry for a few minutes before applying further coats. This ensures a smooth finish.

Pay attention to corners and edges to avoid uneven application.

Once the varnish is completely dry, you can rectify any imperfections by lightly sanding the surface with relatively fine-grained sandpaper.

After using spray varnish, to prevent the varnish from drying out and clogging the nozzle, turn the can upside down and press the nozzle for 2 seconds to remove any varnish remaining inside.